Your device is ready for set-up.
Here's what you can do:
If this is the first mesh you're setting up:
1. Connect one end of the Ethernet cable to the LAN 1 port on the ONT/ONR, as well as the other end to the WAN port of the device.
If this is the second mesh you're setting up:
1. Connect the LAN cable from any LAN port on the first mesh to any available port on the second mesh.
2. Wait for both devices to be green to indicate successful pairing.
3. Unplug the cables and reposition the second mesh in an optimum spot in your house to extend your WIFI coverage.