← Back to the blog

No. While different telcos may use the term “5G+”, the technology and customer experience behind the “+” can differ. Singtel 5G+ combines 700MHz spectrum, 5G Standalone technology and network slicing to enhance network coverage and enable differentiated experiences such as a Priority Network Lane for eligible customers.

So, when you see 5G+ on a mobile plan, do not compare the name alone.

Ask what the “+” actually gives you.

Looking for a complete overview of Singtel 5G+, including 5G+ Enhanced and Priority plans, speed, roaming, mobile security, compatible devices and plan options? Read our full guide to Singtel 5G+ and Singapore’s enhanced 5G mobile experience.

5G+ generally refers to an enhanced 5G mobile experience. However, 5G+ does not necessarily mean the same thing across every telco in Singapore.

Different operators may use different combinations of spectrum, network architecture, coverage enhancements and service features.

This means two plans carrying a 5G+ label may not use exactly the same technologies or provide the same customer benefits.

Instead of comparing the label alone, consumers should look at:

An easy way to understand the difference is to think about driving:

700MHz helps extend the road to more places.

Network slicing changes how traffic can use the road.

This distinction is important when comparing one 5G+ proposition with another.

Singtel has deployed 700MHz spectrum as part of its 5G+ network.

As a lower-frequency spectrum band, 700MHz can travel farther and penetrate buildings more effectively than higher-frequency spectrum.

This helps strengthen 5G coverage in locations where mobile signals can traditionally be more challenging, including:

According to Singtel, its 700MHz network layer can increase signal strength by up to 40% in high-rise, underground and harder-to-reach locations across Singapore.

However, stronger coverage is only one part of the Singtel 5G+ experience.

5G network slicing allows a 5G Standalone network to create multiple virtual network “slices” over shared physical infrastructure.

Each slice can be configured to support different requirements.

This means network resources do not always need to be delivered in exactly the same way to every service or connection. They can be differentiated according to the experience they need to support.

For consumers, Singtel applies this capability through Singtel 5G+ Priority.

Eligible customers can access a Priority Network Lane, where their connectivity is prioritised on the Singtel 5G+ network.

Think of it as an express lane on a busy highway. When many people are trying to use the network at the same time, priority access to network resources can help provide a differentiated connectivity experience.

Learn more about the Singtel 5G+ Priority Lane and eligibility requirements.

A strong signal and network priority are not the same thing.

Signal strength describes the connection between your device and the mobile network. Network priority relates to how available network resources are allocated.

Consider a crowded concert, festival or transport hub. Large numbers of people may be messaging, streaming, uploading videos and accessing social media at the same time.

In such situations, coverage remains important—but so does the way network resources are managed.

Network slicing introduces the ability to differentiate network resources for particular experiences or service requirements.

That is why the conversation around advanced 5G should not only be:

“How fast can my phone go?”

It should also include:

“What happens when many people are trying to connect at the same time?”

When comparing Singtel 5G+ with other 5G+ offerings in Singapore, do not assume the “+” represents exactly the same technology or customer benefit.

Ask these four questions.

1. How does the network improve coverage?

Look for enhancements such as lower-frequency spectrum that can improve network reach and indoor signal penetration.

Singtel uses 700MHz spectrum to strengthen coverage in indoor, high-rise, underground and harder-to-reach environments.

2. Is the network built on 5G Standalone?

5G Standalone, also known as 5G SA, provides the network architecture needed to support advanced capabilities such as network slicing.

A compatible device may also be required to experience the full benefits. Customers can check Singtel’s list of 5G Standalone-compatible phones.

3. Does it support network slicing?

Network slicing moves the conversation beyond basic coverage and maximum speed.

It allows network resources to be configured for different service requirements. However, consumers should check what the operator’s implementation actually provides, as network slicing can support different use cases.

4. What does the technology actually do for customers?

This may be the most important question.

Technical features matter when they translate into a clear and useful customer benefit.

For Singtel, 5G+ Priority uses network slicing to provide eligible customers with a Priority Network Lane.

Not necessarily.

Maximum download speed can be useful when comparing mobile networks, but it does not tell the whole story.

Your actual mobile experience can depend on several factors, including:

That is why 5G+ should not be judged on speed alone.

A more advanced mobile network experience is also about coverage, capacity and how intelligently the network manages different connectivity requirements.

Is every telco’s 5G+ the same?

No. Different telcos may use 5G+ to describe different network enhancements, technologies or plan benefits. Compare the underlying spectrum, coverage, network architecture and customer benefits instead of relying on the 5G+ label alone.

What is the difference between 700MHz and network slicing?

700MHz is radio spectrum that can improve network reach and indoor signal penetration. Network slicing is a 5G Standalone capability that enables network resources to be configured and allocated for different requirements.

In simple terms, 700MHz primarily addresses reach, while network slicing enables differentiated network experiences.

What makes Singtel 5G+ different?

Singtel 5G+ combines 700MHz spectrum, 5G Standalone architecture and network slicing. The 700MHz layer improves network reach and indoor coverage, while network slicing enables differentiated experiences such as Singtel’s Priority Network Lane.

Does 5G+ always mean faster mobile speeds?

Not necessarily. Speed can be one part of a 5G+ offering, but customers should also consider coverage, capacity, network architecture, congestion, latency and how network resources are allocated.

What should I compare when choosing a 5G+ network in Singapore?

Compare the network’s coverage, spectrum, 5G Standalone support, network-slicing capabilities, device requirements and the practical benefits included in the mobile plan.

No. The “5G+” label alone does not tell you which technologies or customer benefits sit behind it.

700MHz spectrum can improve the reach and penetration of 5G signals.

Network slicing does something different: it enables network resources to be differentiated for particular experiences and requirements.

Singtel 5G+ brings these capabilities together through its 700MHz network layer, 5G Standalone architecture and network slicing technology.

Therefore, when comparing 5G+ offerings in Singapore, look beyond the “+”.

Ask what it actually does.

700MHz helps 5G reach you.

Network slicing helps the network work differently for you.

With Singtel 5G+ Priority, this advanced network capability becomes a Priority Network Lane for eligible customers.

For information about 5G+ Enhanced and Priority plans, unlimited data, roaming benefits, mobile security, compatible devices and how to enjoy Singtel 5G+, read the complete Singtel 5G+ guide.

You can also explore the latest Singtel 5G+ mobile plans.

Actual network performance may vary depending on factors such as device capability, location, building structure, coverage, network traffic and the selected mobile plan.